Portable Solar Generator

Ensupra grid tie power inverter can obtain the wind and solar energy from wind turbine or solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is Do-It-Your Self (DIY). When the sun shines, the PV panel will produces DC voltage, and the grid tie inverter will change the DC voltage to AC voltage and puts out power to the home grid, saving electricity. INSTALLATION: 1, Connect the Solar Panel or Wind Turbine s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct. Recommended DC input cable size for maximum output is 12AWG or cables that can handle more than 15A. Optimal length would be less than 8m, longer cables will experience higher voltage drop. The range of output power of Solar Panel or Wind Turbine is 50W~550W. 2, Connect the supplied AC power cord to the inverter and plug it to a home wall socket. 3, The green LED indicators will glow when the grid and DC supply is detected. This indicates the inverter is operating under normal condition. The red LED will be on, the inverter will not put out power, this is called Island Protection. Please follow local regulatory electrical codes for installation. If in doubt, consult appropriate licensed contractor. Electrical Specifications: Maximum AC Output Power: 500W AC Output Voltage Range: 120V ±10% AC Output Frequency Range: 60±3Hz Total Harmonic Distortion(THD):

Amazon Sales Rank: #4748 in Lawn & Patio Brand: Ensupra Model: Ensupra 500-12 Dimensions: 9.00" h x 5.00" w x 11.00" l, 6.00 pounds Simply Plug Into Your Wall Electric Outlet (110Volt AC) Save Electricity and Sell Back to Utility Grid Inlet Power Source of 10.8VDC to 28VDC from Solar Panel, Wind Turbine Generator, Hydro, Storage Battery or Any other DC Electric Source. Pure Sine-Wave, Advanced MPPT, Island Protection, 90% Peak Efficiency Search ENSUPRA for our Plug'n play Energy Products of Your Choice

Most helpful customer reviews 8 of 9 people found the following review helpful. Works better than expected By William S. Boyd I hooked up three 12 volt batteries in series, and used a Kill-A-Watt to measure the output. The output was 500 watts at 36 volt input, and the 90 amphour batteries lasted 5 hours. I believe the inverter will put out 550 watts at 48 volts. I have only run it 4 hours, but I don't expect any problems when hooking it up to a solar panel. 2 of 2 people found the following review helpful. Works as described. By James D. Bartlett The inverter is plug and play. Simple as that. I built my own 250 watt solar panel with another in the works. 4 bolts to mount the inverter in the box, M size connectors and plug it in. Flip the switch and the green light comes on. Done and done. 1 of 1 people found the following review helpful. Ensupra Inverter By gk Ensupra Grid Tie Inverter is very good product for solar panel. It is so simple to install at affordable price. I am also going for Ensupra Readymade solar for my second solar panel project. See all 5 customer reviews...